AMEWI RC AMXRock AM18 Harvest Scale Crawler Grey 1/18 RTR

Product detailed description

Powerful small off-road model with an impressive appearance.

This little Crawler has everything you need to play in the league of super crawler vehicles. AMXRock AM18 has a whole range of useful features that real top crawler riders need: Sensitive ESC/Receiver 3in1 with standard JR servo connection, extra soft tires with a very good pattern for the best grip even on slippery surfaces, locked differentials, shock absorbers with enough spring travel for extreme torsion of the chassis, covered main transmission with 104:1 reduction and powerful 050/55T engine for high torque. In addition, the 1:18 scale model is completely waterproof and comes ready to drive as an RTR car.

As a small peculiarity, the controller has two additional outputs as standard, for example for connecting roof lights or FPV cameras. The cables are already equipped with a Micro JST connector and installed ready for connection. The snorkel on the body and many other realistic details underline the robust character of the car even more. The included LiPo battery 2S 7.4V 600mAh ensures a long driving time of up to 15 minutes. This commercially available battery is replaceable, has a power Molex connector and a balancing XH.

Package contents:
Ready-to-drive model, 2.4 GHz remote control, 600mAh/7.4V LiPo battery, USB charging cable, DE/EN user manual

You need to purchase:
4x 1.5V AAA micro batteries for the remote control.

Good advice: For better charging of the flashlight, we recommend purchasing a 220V model programmable charger instead of the included USB cable.

Features:
Realistic appearance in scale
Extra soft tires
LED lighting (front and back)
Fully proportional driving function
Waterproof
Locked differentials
Complete metal frame
Sensitive 2.4GHz transmitter with FHSS modulation
ESC/Receiver 3in1 with crawler brake, connector for standard servo (JR connector) and two additional lines for additional modules such as lighting and FPV camera

Technical specifications:
Scale: 1:18
Length: 260 mm
Width: 110 mm
Height: 125 mm
Weight (including battery): 300 g
Wheelbase: 155 mm
Front track width: 108 mm
Rear gauge: 108 mm
Clearance: 30 mm
Front wheels: 55/15 mm
Rear wheels: 55/15 mm
Rim diameter: 25 mm
Gearbox: 104:1 FDL
Front shock absorber: 25 mm
Rear shock absorber: 25 mm
Suspension: coil spring
ESC: 3 in 1 unit, waterproof with JR servo connector
Engine: 050/55T brushed
Drive system: 4x4 cardan
Power steering: 1 kg
Body: Lexan, painted with model accessories in a retro look
Frame: metal
Dimensions of the battery compartment: 53 x 22 x 20 mm
Battery: LiPo 2S 600mAh/7.4V 25C, Molex connector, 51x20x15mm, 28g
Driving time: up to 15 minutes depending on the ambient temperature and other driving conditions
Remote control: 2.4 GHz, with FHSS modulation
Charger: USB charging cable

Quick instructions for use:
1. Charge the drive battery
2. Insert the batteries into the RC transmitter and turn the transmitter ON
3. Insert the flashlight into the model, connect the cable and turn the model ON
4. The steering wheel controls turning right/left. The trigger controls driving forward (push towards each other) or backwards (push away from each other). The brake is activated by releasing the trigger into neutral.
5. The TRIM "+" and "-" buttons are used for fine-tuning the ST control and the TH throttle. It also serves to limit the range of DR Dual rate.
6. The CH3 button is used for switching the third channel (if such a function is activated, for example turning on the lights.
7. After finishing the ride, always first turn off the model and disconnect the flashlight.
8. Then turn off the transmitter.
9. Always charge the battery after driving and store it charged. If the battery is stored discharged, or for some other reason was discharged below a critical value, it can be destroyed and the warranty does not cover this!

WARNING! This RC model is not a toy, but a more sophisticated, functional model that behaves very much like a real machine. Due to its realistic parameters, if it is not properly assembled and operated, it can cause you injury, or injure a spectator, an animal, or damage property. Never leave the model unattended in the presence of children under 10 years of age. The responsibility for damages and injuries is borne by the user of the model, not the manufacturer, nor the seller! The model is intended for use mainly indoors or outdoors on a firm, dry surface. It can also drive on suitable terrain, thick mud, sand, gravel or small pebbles. It can run over puddles and wet surfaces. However, water must not get on the electronics of the model. It is not recommended to wade in deep water, under higher pressure it can leak into the electronics. High, shaggy carpets and tall or thick grass are definitely unsuitable surfaces (it puts a lot of strain on the engine and can cause it to burn, including the control electronics). It must not be driven on public roads and other places (e.g. parking lots) with car traffic. The servomechanism of the steering of the front axle can be overloaded and damaged in the event of improper driving or collisions with obstacles, which is not covered by the warranty. Overloading the power steering can also cause, for example, standing still and unnecessary turning by steering right-left. This model requires reasonable regular maintenance.

The warranty is 24 months and covers manufacturing defects detected immediately during the test operation of the model, or manifested during a short period of time after the start of operation. Wear and tear of functional parts caused by operation and use of the model is not covered by the warranty. The range of operational wear is not defined and may be different for metal and plastic parts of the model. The warranty also does not cover damage caused by impacts, overloading of mechanical or electronic parts of the model, incorrect connection, overheating, locking or neglected maintenance.