.jpg)
Detailed product description
Sheet of water-based paper for making your own stickers (decals).
After cutting out the motif, immerse it in lukewarm water for 15 - 30 seconds. The paper will curl. Then remove the paper from the water and place it on a smooth, flat surface (such as a piece of glass). Let the water act until the paper straightens out. Carefully test with your finger whether the sticker can be moved freely on the backing paper. If the sticker is movable, carefully take the paper in tweezers and place it on the surface of the model. Carefully move the sticker from the backing paper to the desired location on the model.
To improve the copying of the surface, you can use a softener for decals (usually labeled as Decal Fix, Decal Set, etc.). Before using the softener, test its effect on a small test piece of the sticker!
Can also be used as a backing surface for printing your own motif. We recommend first testing the suitability of this paper for your desktop printer (laser, inkjet). After printing, the further procedure is the same as with conventional industrially produced stickers for plastic models.
Depending on the type of printing, it is sometimes recommended to varnish the printed stickers with a suitable transparent varnish.
Product comment Decal paper with transparent surface 180x280mm for laser printer
Be the first who will post an article to this item!
Tradičný český výrobca dekálov (vodolepiek), doplnkov a suvenírov pre modelárov všetkých kategórií.
