Diesellok T679.1 ČSD Ep.IV HO with sound

Product detailed description

Diesellok T679.1 ČSD Ep.IV HO with sound              PIKO 52931

A scale model of a railway locomotive.

Scale: HO 1/87
Epoch: IV
Length: 202mm
Minimum radius: 358mm
Number of driven axles: 4
Number of axles equipped with traction rubbers: 2
Motor: 5-pole with flywheel
Couple's house: NEM 362
LED lights: yes
Sound: yes
Digital interface: NEM 658 PluX22

A scale model of a railway locomotive.

Scale: HO 1/87
Epoch: IV
Length: 202mm
Minimum radius: 358mm
Number of driven axles: 4
Number of axles equipped with traction rubbers: 2
Motor: 5-pole with motor
Couple's house: NEM 362
LED lights: yes
Sound: yes
Digital interface: NEM 658 PluX22

This locomotive is equipped with a NEM 652 connector for connecting a digital decoder and thus for the possibility of digital control in the future after the decoder is purchased and installed. It is recommended to use a decoder from the same manufacturer as the locomotive, or a proven quality brand. If an unsuitable decoder is mounted, it may be destroyed or the locomotive may malfunction.

Explanation
Classic (analog) control allows you to control only one locomotive at a time. If you put two locomotives on a track, they will both move at the same time, in the same direction and at approximately the same speed.
Digital control makes it possible to control several locomotives at the same time through a single controller, while each of them on the same track can go at a different speed and in a different direction (or even stop).

Locomotive maintenance
The locomotive is a delicate electromechanical device, requiring careful handling and regular maintenance. Protect it from impacts, moisture and dust. For basic maintenance, it is enough to drop fine machine oil on the drive gears (only a small amount). Before greasing, protect the locomotive wheels so that there is good electrical contact between the wheel rim and the track. If hair or hair from the carpet gets caught on the axle of the wheels, it is necessary to carefully remove them so that the wheels can rotate freely without increased resistance.

Locomotive service life
The service life of moving parts and the engine is limited by the intensity of operation and the conditions of use. Cardan shafts, gear teeth and carbons on the electric motor are subject to natural wear caused by operation. Their service life can be significantly extended by regular lubrication and cleaning. It must be taken into account that a locomotive that runs several hours a day will wear out sooner than a locomotive that is only used occasionally.

Warning
This model locomotive is not a toy suitable for children under 8 years old! The locomotive is detailed and fragile, requiring careful handling. Some parts have sharp edges and corners that could cause injury to a child if used carelessly without adult supervision. Small parts could be swallowed by a small child!

Edited by: Ing. Jozef Andal

NOTICE: This text is the property of the HTmodel company, protected by copyright law. Its copying and distribution without the written consent of the owner is a crime.