ESC KONECT waterproof brushless 150A

Product detailed description

Brushless regulator for road & off-road chassis Rally, Buggy, Truggy, Short Course, Monster Truck in 1/8 scale.

The 150A continuous load regulator is waterproof and has a switched BEC that provides 6V with a 5A supply. This means that even Hi-Volt servos with high torque and high current can be operated without problems.
It is equipped with two T-DEAN connectors, so it is possible to connect two batteries to the AC regulator without additional adapters. High quality 4mm/G4 gold connectors are prepared for the motor. The system is therefore immediately ready for use (Plug & Play).

The controller can be easily programmed using a separate programming connection and a programming card (not included in the package) without having to disconnect the existing connection in the model beforehand. In this way, the numerous functions of the AC regulator can be adapted to your own needs and without major complications. Alternatively, it can of course also be programmed using the built-in button.
Last but not least, the controller also has a number of safety systems to protect electronics such as the battery, RC kit and servos from damage due to, for example, reverse polarity, overheating, short circuits or undervoltage.

Features

This electronic AC speed controller is ideal for 1/8 scale models. Regardless of whether it is a Buggy, Short Course, Stadium Truck or Truggy

• Waterproof and dustproof regulator
• Powerful 6V BEC with 5A
• Dual port for connecting a fan or programming card
• Switch including a separate button for setting
• Proportional brake with 9 different programs
• The maximum braking force can be set in 5 different modes from 25% to 100% or completely switched off.
• 9 adjustable acceleration curves
• The reverse can be deactivated
• In LiPo mode, the lower voltage limit can be set almost continuously from 2.6 V/cell to 3.4 V/cell.
• Completely ready for connection for battery and motor (Plug & Play) no soldering required

Technical data of the regulator

• Continuous current: 150A
• Peak current: 950A
• Input voltage: 3-6S LiPo battery, 9-18 cell NiMH/NiCd battery
• BEC output power: 6V/5A
• Internal resistance: 0.00035 Ohm
• Engine limit:
  4S LiPo/6cell. NiMH = up to 3000Kv, 6S LiPo/9cell. = up to 2400 square meters
• Type: Sensorless system

Connector system:
Battery side: 2x T/DEAN to connect two LiPo
Controller/Motor: 4mm/G4 gold connectors
Receiver: JR/Graupner connector
Dimensions approx.: 59.5 x 48 x 42 mm with fan
Weight: approx. 178 g