ESC KONECT waterproof brushless 50A

Product detailed description

Alternating regulator for road & off-road model chassis, Drift, Rally, Buggy, Truggy, Short Course, Monster Truck cars in 1/10 scale.

The 50A continuous load regulator is waterproof and has a BEC that provides a voltage of 6V and a current of 3A, making it sufficient for all applications common in this scale. The switch has two functions, on the one hand, the regulator can be turned on and off, on the other hand, it has another button for quick access to programming functions. Using a separate programming connection, it can be programmed very easily without having to disconnect the existing connection in the model beforehand. In this way, it is possible to adapt the numerous functions of the AC regulator to your needs flawlessly and without major complications.
Last but not least, the controller also has a number of safety systems to protect electronics such as the LiPo battery, remote control, control unit and servos from damage such as overheating, signal loss, motor blocking or undervoltage.

Features:

The ideal controller for almost all 1/10 scale car models, be it road cars, Buggy, drift, Rally, Short Course, Monster Trucks, or Truggy.

• Waterproof and dustproof regulator
• Powerful 6V BEC with 3A
• Dual port for connecting a fan or programming card
• Switch including second programming button
• Proportional brake with 8 different programs
• Maximum braking force can be controlled using 4 different modes
• 4 adjustable acceleration curves
• The reverse can be deactivated
• In LiPo mode, the lower voltage limit can be set variably between 2.6 V / cell and 3.4 V / cell in 0.2 V steps, it can also be completely disabled if desired
• Ready to connect battery and motor (Plug & Play)

Technical data of the regulator

• Continuous current: 50A
• Peak current: 300A
• Input voltage: 2-3S LiPo battery, 4-9 cell NiMH/NiCd battery
• BEC output power: 6V / 3A
• Internal resistance: 0.001 Ohm
• Type: Sensorless system

Connector system:
Battery side: Tamiya connector
ESC / Motor: 4mm/G4 gold connectors
Receiver: JR/Graupner connector
Dimensions approx.: 48.5 x 38 x 32 mm with fan
Weight: approx. 90 g