ESC KONECT waterproof brushless 80A

Product detailed description

Alternating controller for 1/10 scale RC car, drift, rally, buggy, truggy, short course and monster truck on-road & off-road chassis

The 80A continuous load regulator is waterproof and has a switched BEC that provides 6V/7.4V with a 3A/5A power supply. This means that even Hi-Volt servos with high torque and high current can be operated without problems.
It is equipped with T-DEAN connectors, so it allows you to connect batteries without additional adapters. High quality 4mm/G4 gold connectors are already prepared for the motor. This means that the system is immediately ready for use without additional soldering work (Plug & Play).

The Konect WP80SL controller can be easily programmed using a separate programming connection and programming card (not included), without having to disconnect the existing connection in the vehicle beforehand. In this way, the numerous functions of the AC regulator can be adapted to your own needs. Alternatively, it can of course also be programmed using the built-in button.
Last but not least, the controller also has a number of safety systems to protect electronics such as the LiPo battery, RC kit and servos from damage due to, for example, reverse polarity, overheating, short circuits or undervoltage.

Features

This AC controller is ideal for 1/10 scale models. Regardless of whether it is a Buggy, Short Course, Stadium Truck or Truggy.

• Waterproof and dustproof regulator
• Powerful 6V/7.4V BEC with 3A/5A
• Dual port for connecting a fan or programming card
• Switch including a separate button for setting
• Proportional brake with 9 different programs
• The maximum braking force can be set in 5 different modes from 25% to 100% or completely switched off.
• 9 adjustable acceleration curves
• The reverse can be deactivated
• The direction of the motor can be programmed on the controller
• In LiPo mode, the lower voltage limit can be set almost continuously from 2.6 V/cell to 3.4 V/cell.
• It is also possible to set two values of temperature overload (105°C and 125°C)
• Plug & Play

Technical data of the regulator

• Continuous current: 80A
• Peak current: 520A
• Input voltage: 2-3S LiPo battery, 6-9 cell NiMH/NiCd battery
• BEC output power: 6V/7.4V with 3A/5A
• Internal resistance: 0.001 Ohm
• Motor limits: all 3000Kv - 5400Kv (without sensor) sizes from size 3650 to 3660.
• Type: Without sensor system

Connector system:
Battery side: T/DEAN to connect two LiPo
Controller/Motor: 4mm/G4 gold connectors
Receiver: JR/Graupner connector
Dimensions approx.: 49.5 x 39.5 x 34.7 mm with fan
Weight: approx. 102 g