Ammo Acrylic Color - Satin White 17ml

Product detailed description

Ammo acrylic paint suitable for airbrush and brush application. Dilutable with water, odorless. Completely dry in 24 hours.

Packaging: 17ml

Note: The color shade presented on the monitor or in printed form may be slightly different from the real one.

Modeling acrylic paint intended for painting or spraying on plastic, polyurethane, metal, wood, ceramics, textiles, or on any other suitable surface. Non-flammable base, dries quickly - after a few minutes the surface can be repainted, it dries completely within 24 hours. A well-dried base color creates a hard, durable surface that can be lightly sanded under water with fine sandpaper to achieve an absolutely perfect surface.

Not suitable for children under 8 years old. Children's work with paint must always be supervised by an adult. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container and do not rub it on your skin!
H phrases: none. R phrases: none. Symbols: none.

Good tip: This acrylic paint is used to color the surface of a model, for example. Before painting or spraying with the final surface color, it is a good idea to spray the surface with some shade of MIG One Shot Primer (or another brand), depending on what surface color you will subsequently paint the model with. Under the light shades of the surface colors, it is advisable to use a corresponding light shade of the base. Subsequent work with MIG paints (or other brands) is much more convenient and the result is absolutely perfect.

Mix the paint well before use. Each color contains a metal ball. With some shades with a denser pigment, the ball may remain stuck to the bottom of the container. Apply to a well-degreased, dry, clean surface. After work, always close the container tightly, the paint dries due to air access. Always wipe the top of the container dry, do not let the paint residue dry even on the edge. This will extend the shelf life of the paint after resealing.

Thinning: Use only original AMIG2000 thinner. When using a thinner of another brand, the color may deteriorate. Clean water is also suitable for thinning when painting, the use of thinner is recommended for airbrush spraying.

Painting: The paint is supplied in such a density that it can be used immediately. It is thus suitable for painting smaller surfaces and parts with a brush. For small repairs, it can be applied with a brush gradually in several layers. If necessary, dilute it with water or AMIG2000 thinner.

Spraying: For spraying, the paint must be diluted significantly. It is usually necessary to test the dilution ratio individually according to the type of spray gun and whether you are spraying an area or a line. The dilution ratio can vary from 1:1 to 1:3 (paint:thinner), but if necessary, you can dilute it appropriately with thinner (possibly with a small amount of water), even more.

Drying time: Against the touch, the paint literally dries "before your eyes" within a few minutes. Drying can be accelerated by using a hair dryer. For further brushing/spraying with a new layer, it is enough to wait 30-40 minutes for the original layer to dry. Complete drying takes approximately 24 hours.

Cleaning: Wash immediately with water after use. While the paint is fresh, it can be completely washed off without leaving any traces. To clean the spray gun, we recommend the original Ammo cleaner (AMIG2001) or another brand, e.g. Tamiya Airbrush Cleaner, Revell Airbrush Cleaner etc.