Surface Primer Titans Hobby - Panzergrau Matt Primer 400ml
Code: AMMO-TTH112Related products
Product detailed description
A range of base spray paints Titans Hobby designed for preparing the surface before the top layer of paint. They are made using the best materials and pigments and are great for all metal, plastic or resin models. All primers are acrylic-based, matte (except metallic colors) and quick-drying.
The paint can has an ergonomic nozzle that allows perfect control over the spray. The lid of the can contains a plastic ring with the exact shade and name of the color.
Packaging: 400ml
Note: The color shade presented on the monitor or in the printed form may be slightly different from the actual one.
Modeling spray paint designed for spraying on plastic, metal, wood, ceramics, textiles, or any other suitable surface. Attention, not suitable for polystyrene foam, contains N-butyl acetate and methyl acetate!
Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable material H280 - Contains gas under pressure: may explode if heated. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. EUH066 - Repeated exposure may cause skin dryness or cracking. P phrases: P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P251 - Pressurized container – Do not pierce or burn, even after use. P410 + 412 - Protect from sunlight. Do not expose to temperatures exceeding 50 ºC/122 ºF. P501 - Dispose of contents/container in accordance with national regulations. Symbols: see below.
Before use, mix the paint well by shaking the container (you must hear a metal ball), at least 1 minute is recommended.
Spraying: Apply to a well degreased, dry and clean surface in an even thin layer from a distance of 15-20 cm. It is better to gradually apply 2-3 thin layers than one thick one.
Drying time: The paint dries to the touch within 20-30 minutes, but it takes at least 4 hours to fully dry, depending on the thickness of the layer. It is recommended to wait at least 16-24 hours before spraying with a new layer.
Cleaning the nozzle: After spraying, turn the container upside down and briefly press the valve. Wipe the remains of the paint from the nozzle with a dry cloth, or soaked in cleaner for spray guns, e.g. Tamiya Airbrush Cleaner or another brand.
Additional parameters
Category: | Primers and surfacers |
---|---|
Warranty: | 2 years |
The item has been sold out… |
Be the first who will post an article to this item!
Špičkový taliansky výrobca farieb pre modelárov.