Revell Spray Color - 09 Anthracite Grey Matt 100ml

Product detailed description

Revell Spray Color are acrylic spray paints. They harden in a short time and are useful for large surfaces. They have high coverage and are scratch resistant when dry. Thanks to the special composition, Spray Color can also be used for spraying polycarbonate bodies of RC models.

Volume: 100ml

Note: The color shade presented on the monitor or in the printed form may be slightly different from the actual one.

Modeling spray paint intended for spraying on plastic, polycarbonate, metal, wood, ceramics or other suitable surfaces. Attention, not suitable for polystyrene foam, contains DME, hydrocarbons, C7-C9 and alkanes!

Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable material H229 - Pressurized container: may burst if heated H336 - May cause drowsiness or dizziness H412 - Harmful to aquatic life with long lasting effects P phrases: P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P405 - Store locked up. P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 ºC/122 ºF. P501 - Dispose of contents/container to ... Symbols: see below.

Before use, mix the paint well by shaking the container, at least 1 minute is recommended.

Spraying: Apply to a well-degreased, dry, clean surface in an even thin layer from a distance of 20-30 cm. It is better to gradually apply 2-3 thin layers than one thick one. When spraying on surfaces made of non-absorbent materials (plastic, metal, glass,...) it is usually not necessary to prepare the surface with a base paint, but it is recommended. When spraying absorbent surfaces (for example, wood), it is advisable to use the base color first, and apply the spray paint only after the base color has thoroughly dried (approx. 24 hours).

Drying time: The paint dries to the touch within 20-30 minutes, but it takes at least 4 hours to fully dry, depending on the thickness of the layer. It is recommended to wait at least 12-24 hours before spraying with a new layer.

Cleaning the nozzle: After finishing spraying, turn the container upside down and press the valve for 3 seconds. Wipe the remains of the paint from the nozzle with a dry cloth, or soaked in cleaner for spray guns, e.g. Tamiya Airbrush Cleaner or another brand.