Fine Primer Black - Spray 400ml (Includes 2 nozzles)

Product detailed description

AK Interactive basic spray paint (synthetic lacquer). Perfect for all metal, plastic or resin models or figurines. They dry quickly and offer a perfect finish.

The colored top of the can shows the exact shade of the spray. The spray comes with 2 different nozzles.

Volume: 400ml

Note: The color shade presented on the monitor or in printed form may be slightly different from the real one.

Modeling spray paint intended for spraying on plastic, metal, wood, ceramics, textiles or other suitable surfaces. Attention, unsuitable for polystyrene foam, contains Maleic anhydride!

Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable material H229 - Pressurized container: may burst if heated H319 - Causes serious eye irritation EUH 066 - Repeated exposure may cause skin dryness or cracking EUH 208 - Contains Maleic anhydride. May produce an allergic reaction EUH 211 - Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. P-phrases: P101 - If medical advice is needed, have product container or label at hand. P102 -Keep out of reach of children. P103 - Read label before use. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Pressurized container – Do not pierce or burn, even after use. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P271 - Use only outdoors or in a well-ventilated area. P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 ºC/122 ºF. P501 - Dispose of contents/container according to the separate collection system used in your municipality... Symbols: see below.

Before use, mix the paint well by shaking the container, at least 1 minute is recommended.

Applying: Apply to a well-degreased, dry and clean surface in an even thin layer from a distance of 20 - 40 cm. It is better to gradually apply 2-3 thin layers than one thick one. For spraying absorbent surfaces, the application of multiple layers of paint is recommended, but only after the previous layer has completely dried.

Drying time: The paint dries to the touch within 20-30 minutes, but complete drying takes at least 4 hours, depending on the thickness of the layer. It is recommended to wait at least 16-24 hours before spraying with a new layer.

Cleaning the nozzle: After finishing spraying, turn the container upside down and briefly press the valve. Wipe the rest of the paint from the nozzle with a dry cloth, possibly soaked in airbrush cleaner. Tamiya Airbrush Cleaner or other brands.