Package contents
Package includes HobbyZone Carbon Cub 2 RC model airplane, Spektrum DXs mode 2 RC transmitter (left hand throttle), Spektrum Serial Micro SRXL2 DSMX receiver installed, control unit, 30A AC regulator, Park AC motor Park AC motor Park E-flite servo DSV130 Digital MG, E-flite servo DSV130 Digital waterproof, and instructions in Slovak, manual EN, DE, FR, IT.
Characteristics
RC model of the Carbon Cub S2 airplane in a new design with SAFE function and flight modes, Spektrum DXS DSMX transmitter and telemetry, Spektrum Serial Micro SRXL2 DSMX receiver and GPS control unit (SPMA3173 optional GPS module).
The Carbon Cub S2 is equipped with the exclusive SAFE® (Sensor Assisted Flight Envelope) technology, so you can take advantage of the flight envelope protection. The SAFE system ensures the limit values of tilt and ascent or descent. The model cannot be brought into extreme flight positions, and after returning the control levers to neutral, the model will level off into level flight. And you can immediately return to steady flight using the Panic Recovery (Panic button) if you lose your orientation or from an unusual flight position. The large wheels allow it to take off and land on a variety of surfaces, including grass, roads, dirt paths or pavement, or you can install optional floats to allow it to take off from water - increasing the model's versatility and capabilities.
Full telemetry available
The Carbon Cub S 2 is equipped with an AC 30A regulator with telemetry, which provides the DXS transmitter, which is part of the RTF version, with data about the voltage of the propulsion battery. When using a compatible Spektrum G2 transmitter, you'll have access to a range of telemetry data related to real-time system performance, including motor speed, current, battery voltage and more via the Spektrum™ AirWare™ menu. The addition of exclusive Spektrum Smart LiPol battery and SMART charger components facilitates proper and safe charging
SMART telemetry
You can take full advantage of Smart™ technology, use a Smart battery with the model and telemetry data such as current, voltage, temperature and rpm will be sent directly to your transmitter in real time. The DXS transmitter included in the set only indicates the voltage of the drive battery.
The prototype of the model was the Cub Crafters airplane, which in a modern model design is equipped with exclusive and innovative SAFE technology with the option of installing an optional GPS module. If you choose the optional GPS module, you'll have access to advanced features like Autoland, Holding Pattern circling, and Virtual Fence that make it easy for virtually any novice pilot to have a successful first flight. But there are other model options, add-on wing turbulators, large Tundra tires and optional flaps and floats. Thanks to this, the model is very universal, even for advanced flying and further development of pilot skills.
RTF - ready to fly
In the package, you will find all the components you will need for preparation before the flight and for the flight itself. Ready-To-Fly (RTF) includes model parts with fully installed electronics, transmitter including AA batteries, SMART LiPol drive battery and SMART charger.
Durable construction
The model is made of solid and very durable material Z-Foam. The model stands out for its quiet flight thanks to the wing with a semi-symmetrical profile, the flight is therefore reasonably slow and very stable. The wide 3-wheel chassis has a steerable rear wheel, so take-off and landing are very easy.
The Carbon Cub S 2 is delivered with complete electronics and drive installed, you only need to add a LiPol battery with a charger. The battery is stored in the lower part under a plastic cover and is fastened with Velcro.
Tundra size wheels
The Carbon Cub S2's large balloon wheels can safely absorb rough and ungroomed runway surfaces that most models of this size would not be able to handle
Optional flaps
Functional flaps are an option for impressive short runway takeoffs and landings. This feature requires a 7-channel Spektrum transmitter, servos and extension cables. (Sold separately).
Floats are an optional option for conversion to a seaplane and flying on the water surface. Installation takes only a few minutes and all necessary accessories are included in the float kit. (HBZ7390 - Sold separately)
Optional module, LAS landing sensor
The Spektrum Landing Assist Sensor (LAS) is easy to install and can provide automatic assistance during landing. Assists inexperienced pilots in landing by detecting height above terrain for accurate alignment and minimizes or eliminates bounce (works on most surfaces and ensures a safe landing).
Panic Recovery - Panic flight recovery
If you ever lose control of the aircraft in more advanced flight modes, simply switch to beginner mode and release the control sticks. SAFE® Plus technology automatically returns the aircraft to level flight.
Mode Beginner
A beginner, it has a limited tilt with the elevator and ailerons, when the levers are released into neutral, the model stabilizes in a horizontal position, the engine speed is regulated according to the climb or descent, and there is also assistance during take-off and landing.
Advanced mode
Advanced mode, a greater tilt of the model is allowed, but it will not roll over on its back or fall. Flight positions are limited to approximately 60° tilt. There is already a lot of freedom of action and minimal flight corrections are made. When flying above 15m, the automatic leveling of the model to the horizontal position after releasing the levers is not functional.
Expert mode
In the Expert flight mode, the action is completely free without correction and without restrictions on flight positions. You can even fly on your back and perform acrobatic maneuvers.
Spektrum DXS transmitter
The Spektrum DXS 7-channel RC transmitter supports Spektrum™ Smart technology for battery telemetry of Smart controllers and Smart LiPol batteries. Thanks to the possibility of programming using a computer or mobile devices, you can easily upload finished settings to the transmitter. Without a cable, you can easily set reverse channels and change mode using transmitter programming. The transmitter has full range, DSMX® interference immunity, advanced telemetry and proven transmitter ergonomics. Transmitter registration and updates are possible via a PC with an optional USB programming cable (available separately). The transmitter is configured to provide the benefits of SAFE® technology with compatible SAFE-equipped receivers
Battery voltage telemetry
The transmitter has 4 diodes on the front of the case under the transmitter battery voltage indicator, which will inform you about the status of the flight battery. Four green LEDs light up when the flight battery is fully charged, 3 indicate a voltage between half and full, 2 a half-charged battery, and one LED if the battery is low.
After activating and pressing the button, the Autoland Assisted Landing function will be activated and the Carbon Cub S + will independently land at the launch initialization location. You can interrupt the automatic landing at any time by simply pressing a button to avoid obstacles or adjust the direction. Or, if there is no danger, you let the system work to bring the model to a safe landing. As you gain more confidence, you can take more control and eventually learn to land unassisted.
Holding Pattern - circling above the take-off point
This clever exclusive SAFE Plus feature allows you to essentially "pause" your flight so that when activated and quickly pressed, the aircraft will automatically return to a position above the GPS start point and circle until the command is cancelled. It's a great way to safely hand off control to a buddy or regain visual contact if you're out of control and don't know the model's position.
Virtual Fence - Virtual fence
It's very easy to let the model fly too far, but with Virtual Fence you don't have to worry because it creates an invisible boundary that the model won't cross. When it reaches this limit, it automatically turns and flies back, then flaps its wings to indicate that steering control has been re-established.
Panic Recovery - Panic flight recovery
If you ever lose control of the aircraft in more advanced flight modes, simply switch to beginner mode and release the control sticks.
You need to buy more
Power LiPol battery 2200mAh 3S 11.1V, charger and, as an alternative upgrade, a GPS module for the possibility of SAFE Plus functions.
Recommended batteries
Recommended chargers for both conventional LiPol and Smart batteries
If you decide to use modern Smart LiPo batteries in RC models of airplanes or helicopters, or to charge your batteries from other manufacturers, then we recommend the following chargers:
Accessories for normal operation
For the normal operation of flying RC models, you need suitable adhesives, a set of tools and a container for storing LiPol batteries. From our assortment, we recommend a high-quality set of 1.5/2.0/2.5/3.0mm allen screwdrivers and Modelcraft Phillips screwdrivers (set of 6). Modelcraft mini pliers in a case (set) and Modelcraft cutting knife with A6 pad will definitely come in handy for assembly.
For quick repair of aircraft models, we recommend the fast-curing 4-minute Epoxy glue. From our offer, we recommend Speed Epoxy 4 min. 71g
Protective packaging for accumulators
Protective packaging is designed to limit the risk associated with the transport and charging of batteries. LiPo accumulators can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is particularly susceptible to mechanical damage and therefore needs to be carefully protected.
| Category: | Aircraft RTF |
|---|---|
| Warranty: | 2 years |
| ? Wingspan: | 1 - 2m |
| ? Configuration: | RTF |
| ? Recommended age: | from age of 14 years |
Be the first who will post an article to this item!
Výrobca modelov lietadiel na diaľkové ovládanie, pre úplných začiatočníkov aj pre pokročilých.
