Italeri Acrylic Paint - Gloss Orange 20ml

Product detailed description

Packaging: 20ml

Note: The color shade presented on the monitor or in print may be slightly different from the real one.

Modeling acrylic paint intended for painting or spraying on plastic, polyurethane, metal, wood, ceramics, textiles, or on any other suitable surface. Non-flammable base, dries quickly - after 1 hour the surface can be repainted, fully dries within 24 hours. A well-dried base color creates a hard, durable surface that can be lightly sanded under water with fine sandpaper to achieve an absolutely perfect surface. 

Not suitable for children under 8 years old. Children's work with paint must always be supervised by an adult. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin. 
H phrases: none.  R phrases: none.  Symbols: none.

Good tip: This acrylic paint is used to color the surface of a model, for example.  Before painting or spraying with the final surface color, it is good to spray the surface with a layer of base color with a shade close to the surface color. Under the light shades of the surface colors, it is advisable to use a corresponding light shade of the base. Subsequent work with colors is much more convenient and the result is absolutely perfect.

Mix the paint well before use.  Apply to a well-degreased, dry, clean surface. After work, always close the container tightly, the paint dries due to air access. Always wipe the top of the container dry, do not let paint residues dry even on the edge. This will extend the shelf life of the paint after resealing.

Thinning: Use the original Italeri Acrylic Thinner. When using a thinner of another brand, the color may deteriorate.

Painting: The paint is supplied in such a density that it can be used immediately. It is thus suitable for painting smaller surfaces and parts with a brush. For small repairs, it can be applied with a brush gradually in several layers. If necessary, dilute it with water or Italeri Acrylic Thinner.

Spraying: For spraying, the paint must be diluted significantly. It is usually necessary to test the dilution ratio individually according to the type of spray gun and whether you are spraying an area or a line. The dilution ratio can vary from 1:1 to 1:3 (paint:thinner), but if necessary, you can dilute it appropriately with thinner (possibly with a small amount of water), even more. 

Drying time: Against the touch, the paint literally dries "before your eyes" within a few minutes. Drying can be accelerated by using a hair dryer. For further painting/spraying with a new layer, it is enough to wait 30-40 minutes until the original layer dries. Complete drying takes approximately 24 hours. 

Cleaning: Wash immediately with water after use. While the paint is fresh, it can be completely washed off without leaving any traces. To clean the spray gun, we recommend Tamiya Airbrush Cleaner, Revell Airbrush Cleaner, or another brand.