Italeri Acrylic Varnish - Semigloss Clear 35ml

Product detailed description

Packaging: 20ml

Satin (semi-glossy) modeling acrylic varnish intended for painting or spraying on plastic, polyurethane, metal, wood, ceramics, textiles, or on any other suitable surface. Non-flammable base, dries quickly - after 1 hour the surface can be repainted, fully dries within 24 hours.

Not suitable for children under 8 years old. Children's work with varnish must always be supervised by an adult. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: none. P phrases: none. Symbols: none.

Mix the varnish well before use.Apply to a dry and clean surface. Always close the container tightly after work, the varnish dries due to the access of air. Always wipe the top of the container dry, do not let the varnish residue dry even on the edge. This will extend the shelf life of the paint after resealing.

Thinning: Use the original Italeri Acrylic Thinner. Deterioration may occur when using a thinner of another brand.

Painting: The varnish is supplied in such a density that it can be used immediately. For small repairs, it can be applied with a brush gradually in several layers. If necessary, dilute it with water or Italeri Acrylic Thinner.

Spraying: For spraying, the varnish must be diluted. It is usually necessary to test the dilution ratio individually according to the type of spray gun. The dilution ratio can vary from 1:1 to 1:3 (paint/varnish: thinner), but if necessary, you can additionally thin it with a thinner (possibly with a small amount of water), even more.

Drying time: The varnish dries to the touch literally "before your eyes" within a few minutes. Drying can be accelerated by using a hair dryer. For further painting/spraying with a new layer, it is enough to wait 30-40 minutes until the original layer dries. Complete drying takes approximately 24 hours.

Cleaning: Wash immediately with water after use. While the varnish is fresh, it can be completely washed off without leaving any traces. To clean the spray gun, we recommend Tamiya Airbrush Cleaner, Revell Airbrush Cleaner, or another brand.