KAVAN PRO activator CA spray 200ml

Product detailed description

Activator/accelerator for second (cyanoacrylate) adhesives in an aerosol package with a reduced content of hazardous substances. It is used to accelerate the curing of instant adhesives in conditions unfavorable for their natural curing (reaction with air humidity or water contained in the glued parts) in a dry environment, in cold conditions, when gluing inactive materials or when applying a thick layer of glue. The product contains its own component that activates the polymerization of the instant glue, solvents and propellant gas (propane/butane). For this reason, it must not be used when gluing materials that are not resistant to organic solvents (e.g. expanded polystyrene).

The activator is applied from a distance of 20-25 cm to a clean and dry surface, the optimal working temperature range is +10 °C to +30 °C. It can be applied in one of two basic ways:

Small parts: The activator is applied to one glued surface and allowed to dry (remains active for several hours). Then apply second glue to the other joining surface and glue the parts together.
Large parts: Apply a second adhesive to one of the joining surfaces, press the parts together and spray the joint with activator.
Suitable for: instant adhesives for gluing materials resistant to organic solvents.

Not suitable for: polystyrene foam and other materials that are not resistant to organic solvents or elevated temperatures (accelerated polymerization of the glue can release a significant amount of heat, which leads to heating of the glued joint and its surroundings - the more glue is used).

Storage: in a tightly closed container, in a cool, dry and dark place (at a temperature of +5 °C to +25 °C). Do not expose to temperatures below +2°C.