KAVAN PRO PNEU Thin CA glue 20g

Product detailed description

KAVAN PRO PNEU Thin CA glue 20g                Kavan KAV56.9941.CZ

Top thin cyanoacrylate glue with high strength for modeling and general use specially optimized for gluing RC car tires. It comes in a bottle with a clog-resistant applicator.
Thin CA adhesive with low viscosity is ideal for gluing non-absorbent and absorbent materials that adhere perfectly to each other, e.g. gluing RC car tires to discs. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical method of application: The glue is applied to the joint of perfectly matched parts attached to each other. The low viscosity of the glue guarantees perfect penetration into the depth of the joint.

Features

Color: clear
Viscosity: 2–10 mPa∙s
Density: 1.04 - 1.06 g/cm³
Optimum temperature for application: 25 °C
Curing time (depends on the temperature and nature of the bonded materials): e.g. nitrile rubber under 3 s, stainless steel 10–15 s
Full curing: 24 h
Shear strength: 15–25 N/mm²
Operating temperature range: -10 to +40 °C
Max. temperature range: -40 to 85 °C
Optimal gap width between glued parts: zero
Cured glue is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator: KAV56.9977 KAVAN PRE activator CA spray 150ml, KAV56.9958 KAVAN Activator CA spray 150ml, KAV56.9959 KAVAN Activator CA spray 200ml
Recommended debonder: KAV56.9979 KAVAN peeler CA 20g
Removing excess uncured glue: a cloth or paper napkin moistened with acetone (if the glued materials resist it).
Thinning the glue: If the second glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back. If you need a "thinner" second glue, simply use a lower viscosity type. Individual types of KAVAN PRO instant adhesives can be mixed together to achieve optimal viscosity.
Use as sealant, suitable fillers: microballoon filler KAV56.9980 CA KAVAN filler.
Suitable for bonding: RC car tires, soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).
Not suitable for gluing: polystyrene foam, polyethylene, Teflon, silicone.
Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2 to +10 °C). Do not expose to temperatures below +2 °C.
Durability: If the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while preserving the above-mentioned product properties.