KAVAN PRO PNEU Medium CA glue 20g

Product detailed description

KAVAN PRO PNEU Medium CA glue 20g                 Kavan KAV56.9943.CZ

High-strength medium-second (cyanoacrylate) glue for both model and general use specially optimized for gluing RC car tires. It comes in a bottle with a clog-resistant applicator.
Medium second adhesive with medium viscosity is ideal for bonding absorbent and non-absorbent materials that adhere well to each other. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical method of application: The adhesive is applied to one of the contact surfaces and the parts are immediately attached to each other, but the adhesive can also be applied to the joint of well-fitting parts attached to each other.

Features

Color: clear
Viscosity: 801120 mPa∙s
Density: 1.04 - 1.06 g/cm³
Optimum temperature for application: 23 °C
Curing time (depends on the temperature and nature of the bonded materials): e.g. nitrile rubber under 5 s, stainless steel 15–20 s
Full curing: 24 h
Shear strength: 15–25 N/mm²
Operating temperature range: -10 to +40 °C
Max. temperature range: -40 to 85 °C
Optimal gap width between glued parts: zero
Cured glue is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator: KAV56.9977 KAVAN PRE activator CA spray 150ml, KAV56.9958 KAVAN Activator CA spray 150ml, KAV56.9959 KAVAN Activator CA spray 200ml
Recommended debonder: KAV56.9979 KAVAN peeler CA 20g
Removing excess uncured glue: a cloth or paper napkin moistened with acetone (if the glued materials resist it).
Thinning the glue: If the second glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back. If you need a "thinner" second glue, simply use a lower viscosity type. Individual types of KAVAN PRO instant adhesives can be mixed together to achieve optimal viscosity.
Use as sealant, suitable fillers: microballoon filler KAV56.9980 CA KAVAN filler.
Suitable for bonding: RC car tires, soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).
Not suitable for gluing: polystyrene foam, polyethylene, Teflon, silicone.
Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2 to +10 °C). Do not expose to temperatures below +2 °C.
Durability: If the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while preserving the above-mentioned product properties.