Vallejo Acrylic Varnish - Matt Varnish 17ml
Code: 3207705-2Related products
Product detailed description
Water-based acrylic varnish with a matte finish intended for airbrush. After drying, it forms a perfect protective layer against dust, damage, dirt and moisture.
Packaging: 17 ml
Modeling acrylic varnish intended for the final surface treatment of a model or other object. It is designed for spraying (painting is also possible) on paint, or directly on bare plastic, polyurethane, metal, wood, ceramics, textiles, or on any other suitable surface. Non-flammable base, dries quickly - after approx. 1 hour, the surface can be sprayed again, fully dries within 2-3 hours. Well-dried paint creates a hard, durable surface that can be easily polished with a fine polishing paste (for example, Tamiya polishing pastes) to achieve an absolutely perfect surface.
Not suitable for children under 8 years old. Children's work with varnish must always be supervised by an adult. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: none. P phrases: none. Symbols: none.
Mix the varnish well before use. Apply to a well-degreased, dry, clean surface. After work, always close the container well, the varnish dries due to the access of air. Always wipe the top of the container dry, do not let the varnish residue dry even on the edge. This will extend the shelf life of the paint after resealing.
Thinning: Use only original Vallejo thinner. If you use another thinner, the varnish may deteriorate.
Painting: The varnish is supplied in such a dilution that it can be used immediately in a spray gun. However, it is also suitable for painting smaller surfaces and parts with a brush. For small repairs, it can be applied with a brush gradually in several layers.
Spraying: For spraying, the varnish is supplied in a diluted state, but if necessary, you can dilute it appropriately with a thinner (or a small amount of water), according to the type of airbrush and other spraying parameters. To improve the flow of paint through the nozzle of an airbrush, we recommend using Vallejo Flow Improver, which significantly increases the comfort of spraying.
Drying time: The varnish dries to the touch literally "before your eyes" within a few minutes. Drying can be accelerated by using a hair dryer. Complete drying takes approximately 2 hours, depending on the thickness of the layer (it is recommended to spray only in thin layers). For further painting/spraying with a new layer, just wait a few minutes for the original layer to dry.
Cleaning: Wash the tool with water immediately. While the varnish is fresh, it can be completely washed off without leaving any traces. To clean the airbrush, we recommend Airbrush Cleaner Tamiya or another brand.
Additional parameters
Category: | Transparent varnishes and coatings |
---|---|
Warranty: | 2 years |
The item has been sold out… |
Be the first who will post an article to this item!
Španielsky výrobca modelárskych farieb a patinovacích produktov.