MIG-17F Egyptian Air Force Set 4 x 17ml

Product detailed description

MIG-17F Egyptian Air Force Set 4 x 17ml          Ammo by Mig Jimenez A.MIG-7255

A set of modeling acrylic paints intended for painting or spraying plastic models of Soviet MiG-17F aircraft in the service of the Egyptian Air Force.

The set contains 4x17ml:
A.MIG-0067 ACRYLIC COLOR Light Sand Grey
A.MIG-0085 ACRYLIC COLOR NATO Brown
A.MIG-0206 ACRYLIC COLOR RLM 81 - FS 34079 - BS641
A.MIG-0231 ACRYLIC COLOR RLM 65 Hellblau

Note: The shade of color presented on the monitor or in print may be slightly different from the actual shade.

Modeling acrylic paint designed for painting or airbrushing on plastic, polyurethane, metal, wood, ceramics, textiles, or other suitable surfaces. Non-flammable base, dries quickly - after 1 hour the surface can be repainted, fully dries within 24 hours. The well-dried base paint forms a hard durable surface can be lightly sanded under water with fine sandpaper for a completely perfect finish.

Not suitable for children under 8 years of age. Children working with paint must always be supervised by an adult. In case of contact with eyes and mucous membrane, flush with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical attention immediately. Do not drink or eat the contents of the container, do not rub it on your skin.

H sentences: none. R sentences: none. Symbols: none.

Good advice: This acrylic paint is used for coloring the surface of, for example, a model. It is a good idea to spray the surface with some shade of the base color before painting or spraying with the final surface color, the shade of it is depending on what surface color you will paint the model with afterwards. It is advisable to use a matching light shade of base colour under light shades of finish paint. Subsequent work with the paints is much more comfortable and the result is absolutely perfect.

Mix the paint well before use. Apply to a well degreased, dry, and clean surface. Always close the container tightly after work, the paint dries with air. Always wipe the top of the lid dry, do not allow paint residue to dry even on the rim. This will prolong the shelf life of the paint after resealing.

Thinning: use only the original thinner. Using another brand of thinner may cause paint to deteriorate. Plain water is also suitable for thinning when painting, the use of thinner is recommended for airbrushing.

Painting: The paint is made in density for immediate use, so it is suitable for painting smaller areas and parts with a brush. For minor repairs, it can be applied by brush gradually in several coats. Thin with water or thinner if necessary.

Airbrushing: Dilution is necessary for airbrushing. Diultion needs to be tested individually according to the type of spray gun and whether you are spraying a surface or a line. The dilution ratio can range from 1:1 to 1:3 (paint:thinner), but you can dilute it appropriately with thinner (or a small amount of water), even more if necessary.

Drying time: against touch, the paint dries literally "before your eyes" within a few minutes. The drying time can be further accelerated by using a hair dryer. To paint/spray a new layer, simply wait 30-40 minutes for the original layer to dry. Complete drying takes approximately 24 hours.

Cleaning: While the paint is fresh, it can be completely washed off without leaving any residue. We recommend Tamiya Airbrush Cleaner, Revell Airbrush Cleaner, or another brand to clean the spray gun.

Processed by: Ing. Jozef Anďal

NOTICE: This text is the property of HTmodel and protected by copyright law. Its copying and distribution without the written permission of the owner is punishable.