Mr. Hobby-Gunze Mr. Finishing Surfacer 1500 Black 40 ml

Product detailed description

Basic black colored paint with 1500 grit (finer grain). it contains special pigment that covers black, red and other dark parts well. It is used for preparation of the surface of the model for spraying the top layer of paint and to cover the surface defects of the model. Designed for spray guns. Can be thinned with Mr.Color Thinner.

Volume: 40ml

Note: The color shade presented on the monitor or in the printed form may be slightly different from the actual one.

Not suitable for children under 8 years old. Children's work with paint must always be supervised by an adult. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H225 - Highly flammable liquid and vapour. H315 - Irritating to skin. H318 - Causes serious eye damage. H335 - May cause respiratory irritation. H336 - May cause drowsiness or dizziness.P phrases: P101 - If medical attention is needed, have the product container or label available. P102 - Keep out of reach of children. P103 - Read label before use. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes.If you wear contact lenses, remove them if possible. Continue rinsing. P321 - Professional treatment. P362 + 364 Take off contaminated clothing and wash before further use. P405 - Keep locked up. P501 - Dispose of contents/container by... Symbols: see below.

Good tip: This base color is used to prepare the surface before spraying or painting with a top coat of paint. Choose the color based on the shade of the surface coating or spray. Under light shades, it is advisable to use a corresponding light shade of the foundation. Subsequent work with colors is much more convenient and the result is absolutely perfect.

Mix the paint well before use.Apply to a well-degreased, dry, clean surface. After work, always close the container tightly, the paint dries due to air access. Always wipe the top of the container dry, do not let paint residues dry even on the edge. This will extend the shelf life of the paint after resealing.

Thinning: Use only the original Mr Hobby - Gunze Mr. Thinner. Color Thinner or Mr. Color Leveling Thinner. When using a thinner of another brand, the color may deteriorate. When painting, it is advisable to use a smaller amount of thinner than for spraying.

Painting: The paint is supplied in such a density that it can be used immediately. It is thus suitable for painting smaller surfaces and parts with a brush. For small repairs, it can be applied with a brush gradually in several layers. If necessary, dilute it with thinner.

Spraying: For spraying, the paint must be diluted significantly. It is usually necessary to test the dilution ratio individually according to the type of spray gun and whether you are spraying an area or a line. The dilution ratio can range from 1:1 to 1:3 (paint:thinner), but you can dilute it further if necessary.

Drying time: Against the touch, the paint literally dries "before your eyes" within a few minutes. Drying can be accelerated by using a hair dryer. For further painting/spraying with a new layer, it is enough to wait 30-40 minutes until the original layer dries. Complete drying takes approximately 24 hours.

Cleaning: Wash immediately with water after use. While the paint is fresh, it can be completely washed off without leaving any traces. To clean the spray gun, we recommend Mr Hobby - Gunze Mr cleaner. Brush Cleaner Liquid or another brand, e.g. Tamiya.