Mr Hobby - Gunze Mr. Metal Primer Spray (100 ml)

Product detailed description

Basic spray paint for metal surfaces. It is used to prepare the surface of the model for spraying the top layer of paint and to cover surface defects.

Volume: 170ml

Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable aerosol.  H280 - Contains gas under pressure; may explode when heated. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. EUH-066 - Repeated exposure may cause skin dryness or cracking.  P-phrases: P101 - If medical attention is needed, have the product container or label available. P102 - Keep out of reach of children. P103 - Read label before use. P210 - Keep away from heat/sparks/open flames/hot surfaces. Don't smoke. P211 - Do not spray on an open flame or other ignition source. P251 - Container is pressurized: do not puncture or burn, even after the contents are used. P271 + P260 - Use only outdoors or in a well-ventilated area. Do not breathe dust/fume/gas/mist/vapours/aerosols. P410 + P412 - Protect from sunlight. Do not expose to temperatures above 50°C/122°F. P501 - Dispose of contents/container by... Symbols: see below.

Before use, mix the paint well by shaking the container, at least 1 minute is recommended.

Applying: Apply to a well-degreased, dry and clean surface in an even thin layer from a distance of 20-40 cm. It is better to gradually apply 2-3 thin layers than one thick one. When spraying non-absorbent materials, an initial layer of primer is not necessary, because the paint has the properties of both a primer and a surface paint. For spraying absorbent surfaces, the application of several layers of paint is recommended, but only after the previous layer has completely dried.

Drying time: The paint dries to the touch in 20-30 minutes, but it takes at least 4 hours to fully dry, depending on the thickness of the layer. It is recommended to wait at least 16-24 hours before spraying with a new layer.

Cleaning the nozzle: After spraying, turn the container upside down and briefly press the valve. Wipe the remains of the paint from the nozzle with a dry cloth, or soaked in cleaner for spray guns, e.g. Tamiya Airbrush Cleaner or another brand.