Revell Email Color - Leopard 2 A6M+ (6x14ml)

Product detailed description

A set of Revell synthetic paints designed for painting or spraying contemporary German Leopard main battle tanks.

The set includes shades:
32106 - Tar Black Matt
32105 - White Matt RAL9001
32116 - Sandy Yellow Matt RAL1014
32109 - Anthracite Grey Matt RAL7021
32191 - Tank Grey Matt RAL7024
32178 - Steel Metallic

Note: The color shade presented on the monitor or in printed form may be slightly different from the real one.

Modeling synthetic paint designed for painting or spraying on plastic, metal, wood, ceramics, textiles, or any other suitable surface.

Not suitable for children under 8 years old. Children's work with paint must always be supervised by an adult. Combustible, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H226 Flammable liquid and vapour. H336 May cause drowsiness or dizziness. P-phrases: P101 If medical attention is needed, have the product container or label available. P102 Keep out of reach of children. P103 Read label before use. P210 Keep away from heat/sparks/open flames/hot surfaces. Don't smoke. P280 Wear protective gloves/protective clothing/safety glasses/face protection. P240 Ground/secure container and filling equipment. P303+P361+P353 IF ON SKIN (or hair): Remove/take off all contaminated clothing. Rinse skin immediately with water/shower. P405 Keep locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. Symbols: see below.

Mix the paint well before use. Apply to a well-degreased, dry, clean surface. After opening, use as soon as possible, the paint dries due to exposure to air. Always wipe the top of the can dry, do not let paint residues dry even on the edge of the can. This will extend the shelf life of the paint after resealing.

Thinning: Use only original Revell Color mix 39612 (REV-39612) thinner. If you use another thinner, the color may deteriorate.

Painting: For painting, it is advisable to leave the paint in a thicker form, only dilute with a small amount of thinner. When painting non-absorbent materials (plastic, metal, glass,...) it is usually not necessary to prepare the surface with a base paint and usually one layer of paint is enough for good coverage. When painting absorbent surfaces (for example wood), it is advisable to use the base color first, or to apply the first layer of a thicker color and after it has dried thoroughly (at least 24 hours), cover it with a second thin layer of paint.

Airbrushing: For airbrushing, the paint is usually diluted in a ratio of 1 part of thinner to 1 part of paint, but the thinner can be appropriately more, depending on the type of airbrush gun and other parameters.

Drying time: The paint dries to the touch in 20 minutes, but it takes at least 4 hours to fully dry, depending on the thickness of the layer. It is recommended to wait at least 12 hours for the next coating/airbrushing with a new layer.

Cleaning: To clean the brush, we recommend the original Revell Painta Clean 39614 (REV-39614). To clean the spray gun, we recommend Revell Airbrush Email Clean 500 ml 39005 cleaner (REV-39005).