AK Color Spray - Sand Yellow 150ml

Product detailed description

AK Interactive spray paint (synthetic lacquer). Perfect for all metal, plastic or resin models or figurines. It dries quickly and offers a perfect finish. Extremely resistant to acrylic, synthetic or lacquer weathering products.

The colored top of the can shows the exact shade of the spray.

Volume: 150ml

Note: The color shade presented on the monitor or in printed form may be slightly different from the real one.

Modeling spray paint intended for spraying on plastic, metal, wood, ceramics, textiles or other suitable surfaces. Attention, not suitable for polystyrene foam.

Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable material. H229 - Pressurized container: may burst if heated. H319 - Causes serious eye irritation. EUH 066 - Repeated exposure may cause skin dryness or cracking. P-phrases: P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P103 - Read label before use. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Pressurized container – Do not pierce or burn, even after use. P271 - Use only outdoors or in a well-ventilated area. P260 - Do not breathe dust/fume/gas/mist/vapours/spray. P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 ºC/122 ºF. P501 - Dispose of contents/container according to the separate collection system used in your municipality... Symbols: see below.

Before use, mix the paint well by shaking the container, at least 1 minute is recommended.

Applying: Apply to a well-degreased, dry and clean surface in an even thin layer from a distance of 20 - 40 cm. It is better to gradually apply 2-3 thin layers than one thick one. For spraying absorbent surfaces, the application of multiple layers of paint is recommended, but only after the previous layer has completely dried.

Drying time: The paint dries to the touch within 20-30 minutes, but complete drying takes at least 4 hours, depending on the thickness of the layer. It is recommended to wait at least 16-24 hours before spraying with a new layer.

Cleaning the nozzle: After finishing spraying, turn the container upside down and briefly press the valve. Wipe the rest of the paint from the nozzle with a dry cloth, possibly soaked in airbrush cleaner. Tamiya Airbrush Cleaner or other brands.