Set-up system table 1/24 & 1/18

Product detailed description

Tool to calculate parameters of RC cars in 1/24 and 1/18 scale.

It is used to measure:

• Maximum front and rear suspension travel on both sides, both in extension and compression.
• Front approach angle.
• Rear exit angle.
• Wheelbase distance between axles.
• Width between axles.
• Tire width.
• The maximum limit angle of inclination of the overturning in the side passage.
• The maximum limit angle of vertical tipping uphill.
• The maximum limit angle of inclination of vertical overturning during descent.
• Free height of differentials.
• Central ventral free height.
• Front-rear weight distribution.
• Weight distribution on the left and right side.
• The height of the center of the wheel and its overall diameter.

Scale: 1/18 and 1/24
Suitable for vehicles with a maximum width of: 130mm

Obstacle kit intended for remotelly controlled models of expedition and crawler cars. It is made of 100% laser-cut wooden parts, which can be removed from the sheet by just a slight push. No glue is needed to build the obstacle and all the parts fit together easily. The construction manual are shown on the plate as a QR code, which you simply scan before starting construction.

Obstacles can be attached to a carpet or other surface using "sharp" parts or by screwing. Support legs and 4 locking mechanisms are also included with each kit. These can be used for an attachment to pathways which are purchased separately or are part of sets. Simply attach the support legs to the bottom of the obstacle. Insert the locks into the pre-cut circular holes and then attach the entire obstacle to the path. By turning the locks, you attach it firmly to it and lock it in place. The paths fit together like a puzzle, so they are ideal for creating a perfect obstacle course.

Obstacles are suitable for expedition or crawler RC models in 1/10, 1/12, 1/18 and 1/24 scales

Improve your off-road driving skills with Crawler Park. Driving realism challenges you to overcome climbs, sidesteps and dizzying descents. Play with the car's inertia, traction and steering, learn to control the amount of gas and when to brake to prevent the car from rolling over. Crawler Park is 100% scalable and customizable for all tastes, configure your circuit or track without limits and change the challenges as many times as you want.

WARNING! Be careful when removing the cut pieces from the wood board as sharp parts may be exposed.The product is recommended for people over 14 years of age.