Tamiya Spray Paint - TS-11 Maroon Gloss 100ml

Product detailed description

Tamiya TS are synthetic lacquer spray paints. They harden in a short time and are useful for large surfaces. The colors do not react with acrylic / enamel paints or weathering products. Each can contains enough paint to completely cover 2 or 3 model car bodies in 1/24 scale.

Volume: 100ml

Note: The color shade presented on the monitor or in printed form may be slightly different from the real one.

Modeling spray paint intended for spraying on plastic, metal, wood, ceramics or any other suitable surface. Attention, not suitable for polystyrene foam, contains dimethyl ether!

Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable aerosol. H229 - Container under pressure: May burst when heated.  H315 - Irritating to skin.  H318 - Causes serious eye damage.  H332 - Harmful if inhaled.  H411 – Toxic to aquatic life with long lasting effects.  EUH 066 - Repeated exposure may cause skin dryness or cracking.  P phrases: P102 - Keep out of the reach of children. P210 - Keep away from heat/sparks/open flames/hot surfaces. Don't smoke. P211 - Do not spray on an open flame or other ignition source. P280 - Wear protective gloves/protective clothing/safety glasses/face protection. P405 - Keep locked up. P410 + P412 Protect from sunlight.  Do not expose to temperatures above 50°C/122°F. P501 - Dispose of contents/container by... Contains Isobutanol, 4-Methylpentan-2-one, Butyl glycol and n-Butyl acetate Symbols: see below.

Before use, mix the paint well by shaking the container, at least 1 minute is recommended.

Spraying: Apply to a well-degreased, dry, clean surface in an even thin layer from a distance of 20-30 cm. It is better to gradually apply 2-3 thin layers than one thick one. When spraying on surfaces made of non-absorbent materials (plastic, metal, glass,...) it is usually not necessary to prepare the surface with a base paint, but it is recommended. When spraying absorbent surfaces (for example, wood), it is advisable to use the base color first and apply the spray paint only after the base color has thoroughly dried (approx. 24 hours).

Drying time: The paint dries to the touch within 20-30 minutes, but it takes at least 4 hours to fully dry, depending on the thickness of the layer. It is recommended to wait at least 12-24 hours before spraying with a new layer.

Cleaning the nozzle: After spraying, turn the container upside down and briefly press the valve. Wipe the remains of the paint from the nozzle with a dry cloth, or soaked in airbrush, e.g. Tamiya Airbrush Cleaner or another brand.