Tamiya Spray Paint Varnish - TS-13 Clear Gloss 100ml

Product detailed description

Tamiya TS-13 is a synthetic spray paint with a glossy finish. It hardens in a short time and is useful for large surfaces. The varnish does not react with acrylic or enamel paints or weathering products. Each can contains enough paint to completely cover 2 or 3 1/24 scale model car bodies.

Volume: 100ml

Modeling varnish in spray intended for spraying on plastic, metal, wood, ceramics or other suitable surface. Attention, not suitable for polystyrene foam, contains dimethyl ether!

Not suitable for children. Children's work with paint must always be supervised by an adult. Combustible, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable aerosol. H229 - Container under pressure: May burst when heated.H315 - Irritating to skin.H318 - Causes serious eye damage.H332 - Harmful if inhaled.H411 ​​– Toxic to aquatic life with long lasting effects.EUH 066 - Repeated exposure may cause skin dryness or cracking. P phrases: P102 - Keep out of the reach of children. P210 - Keep away from heat/sparks/open flames/hot surfaces. Don't smoke. P211 - Do not spray on an open flame or other ignition source. P280 - Wear protective gloves/protective clothing/safety glasses/face protection. P405 - Keep locked up. P410 + P412 Protect from sunlight.Do not expose to temperatures above 50°C/122°F. P501 - Dispose of contents/container by... Contains Isobutanol, 4-Methylpentan-2-one, Butyl glycol and n-Butyl acetate Symbols: see. below.

Before use, mix the varnish well by shaking the container, it is recommended for at least 1 minute.

Spraying: Apply to a well degreased, dry and clean surface in an even thin layer from a distance of 20-40 cm. It is better to gradually apply 2-3 thin layers than one thick one.

Drying time: The varnish dries to the touch within 20-30 minutes, but complete drying takes at least 4 hours, depending on the thickness of the layer. It is recommended to wait at least 16-24 hours before spraying with a new layer.

Cleaning the nozzle: After spraying, turn the container upside down and briefly press the valve. Wipe off the remains of the paint from the nozzle with a dry cloth, or one soaked in cleaner for spray guns, e.g. Tamiya Airbrush Cleaner or another brand.