Tamiya Fine Surface Primer L Light Grey Spray 180ml

Product detailed description

Modeling base paint in spray intended for preparing the surface of the model before applying the surface layer of paint. Unifies the surface of the model and fills fine scratches and imperfections.

Volume: 180ml
Shade: Light gray

Note: The color shade presented on the monitor or in the printed form may be slightly different from the actual one.

Modeling spray paint designed for spraying on plastic, metal, wood, ceramics, textiles, or any other suitable surface. Attention, not suitable for polystyrene foam, contains N-butyl acetate and methyl acetate!

Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, dangerous fumes, thoroughly ventilate the room during work. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of breathing problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: H222 - Extremely flammable material H280 - Contains gas under pressure: may explode if heated. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. EUH066 - Repeated exposure may cause skin dryness or cracking. P phrases: P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P251 - Pressurized container – Do not pierce or burn, even after use. P410 + 412 - Protect from sunlight. Do not expose to temperatures exceeding 50 ºC/122 ºF. P501 - Dispose of contents/container in accordance with national regulations. Symbols: see below.

Before use, mix the paint well by shaking the container (you must hear a metal ball), at least 1 minute is recommended.

Spraying: Apply to a well degreased, dry and clean surface in an even thin layer from a distance of 15-20 cm. It is better to gradually apply 2-3 thin layers than one thick one.

Drying time: The paint dries to the touch within 20-30 minutes, but it takes at least 4 hours to fully dry, depending on the thickness of the layer. It is recommended to wait at least 16-24 hours before spraying with a new layer.

Cleaning the nozzle: After spraying, turn the container upside down and briefly press the valve. Wipe the remains of the paint from the nozzle with a dry cloth, or soaked in cleaner for spray guns, e.g. Tamiya Airbrush Cleaner or another brand.