AK Interactive Color Set - WWII Luftwaffe Cockpit & Interior Colors SET

Detailed product description

AK-Interactive Real Colors lacquer paint set suitable for airbrushing or brush painting. The set is suitable for painting or spraying the interiors of Luftwaffe aircraft from World War II.

The set includes:

• RC932 RLM 02 RLM-Grau (1938)
• RC933 RLM 02 RLM-Grau (1941)
• RC937 RLM 66 (1938)
• RC938 RLM 66 (1941)

Note: The color shade presented on the monitor or in print may differ slightly from the actual one.

Modeling lacquer paint intended for airbrushing on plastic, metal, wood, ceramics, textiles or other suitable surfaces.
Real Color lacquer paints from AK Interactive are airbrush gun paints with high quality and covering ability that add realistic tones to your model. Their durable film is ideally suited for use as a surface layer, resistant to other preparations (e.g. wash, filter, etc.), while fast drying guarantees an effective and quick process when painting the model.

Not suitable for children under 8 years of age. Children's work with paint must always be supervised by an adult. Flammable, hazardous fumes, ventilate the room thoroughly when working. Do not use open flames and sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of inhalation problems, ensure fresh air supply, ventilate. In case of ingestion, do not induce vomiting, seek medical attention immediately. Do not drink or eat the contents of the container, do not apply it to the skin.

H phrases: H226 - Flammable liquid and vapor. H315 - Causes skin irritation. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. P phrases: None* (not specified by the manufacturer) Symbols: see below.

Stir the paint well before use. Apply to a well-degreased, dry, clean surface. After opening, use as soon as possible, the paint dries with air access. Always wipe the bottle cap dry, do not let paint residues dry even on the edge of the neck thread. This will prevent the lid from sticking and extend the shelf life of the paint after re-closing.

Thinning: Use only the original RC701/RC702 - High Compatibility Thinner. Using another thinner may damage the paint.

Surface preparation: To improve paint adhesion and a more beautiful final surface of the model, we recommend using a base paint in a spray can or in a bottle.

Painting: The paint is not suitable for painting with a brush because it is too thin. For application, it is recommended to use an airbrush.

Spraying: When applying paint with an airbrush, it is not necessary to dilute the paint, because the paint is supplied already diluted. For dilution, use only the original thinner (number RC701/RC702). The paint is applied under a pressure of approximately 1.5 bar (kg/cm2), but the ideal pressure also depends on the type of airbrush and other spraying parameters. Apply the paint in thin, continuous layers to avoid unwanted build-up of paint in one place and run-off.

Drying time: The paint dries to the touch within a few minutes, but it takes 1 hour to dry completely. It is recommended to wait at least 2 hours before re-spraying. It is recommended to let the paint dry for at least 24 hours before applying washes, pigments, filters, etc.

Cleaning: It is recommended to use RC701/RC702 - High Compatibility Thinner to clean the airbrush.