Base Color MIG One Shot Primer - Black 60ml

Product detailed description

Volume: 60ml

The One Shot Primer range of basic paints is used to prepare the surface for the top coat of paint. Contains 7 different shades, including a transparent one. Choose the color shade according to the surface color you will subsequently paint the model with. Under the light shades of the surface colors, it is advisable to use a corresponding light shade of the primer. The colors are self-leveling, so they preserve even the finest details of the model. The base color is suitable for spraying plastic, metal (photoetched), resin or 3D printed parts.

Application: One Shot Primer base colors are applied directly from the bottle to an airbrush. The paint is supplied in a diluted state, so it can be used immediately, or diluted with a small amount of Acrylic Thinner (AMIG2000).Apply from approx. 15 centimeter distance under a pressure of 1.5 - 2 bars (20 - 30 psi).They are dry to the touch in about 20 minutes, but it takes 24 hours to dry completely. After complete drying, the surface can be sanded with fine sandpaper to remove the imperfection of the spray.

Note: The color shade presented on the monitor or in the printed form may be slightly different from the actual one.

Not suitable for children under 8 years old. Children's work with paint must always be supervised by an adult. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container and do not rub it on your skin!
H phrases: none. P phrases: none. Symbols: none.

Mix the paint well before use. Apply to a well-degreased, dry, clean surface. After work, always close the container tightly, the paint dries due to air access. Always wipe the top of the container dry, do not let paint residues dry even on the edge. This will extend the shelf life of the paint after resealing.

Thinning: Use only original AMIG2000 thinner. When using a thinner of another brand, the color may deteriorate.

Cleaning: Wash immediately with water after use. While the paint is fresh, it can be completely washed off without leaving any traces. To clean the spray gun, we recommend the original Ammo Cleaner (AMIG2001) or another brand, e.g. Tamiya Airbrush Cleaner, Revell Airbrush Cleaner etc.