Vallejo Surface Primer - Russian Green 4BO 60ml

Product detailed description

The range of Vallejo Surface Primer base colors intended for airbrushing and to prepare the surface for the top layer of paint of the model or figure. Choose the shade of paint according to the top color you will subsequently spray the model with. Under the light shades of the surface colors, it is advisable to use a corresponding light shade of the base. The base color is suitable for spraying plastic, metal (photoetched), resin or 3D printed parts. They preserve even the smallest details and improve the adhesion of the surface finish.

Packaging: 60ml

Application: Vallejo Surface Primer colors are applied directly from the bottle into the airbrush. The paint is supplied diluted, so it can be used immediately or diluted with a small amount of Vallejo thinner. Apply from approx. 15 centimeter distance under a pressure of 15 - 20 psi. They are dry to the touch in about 20 minutes, but it takes 24 hours to dry completely.

Note: The color shade presented on the monitor or in the printed form may be slightly different from the actual one.

Manufacturer's Note: Each color is based on extensive expert research into existing and previous military references to offer the modeller the highest possible historical accuracy.

Modeling water-dilutable acrylic paint designed for spraying on plastic, metal, wood, ceramics, textiles, or any other suitable surface. Non-flammable base, dries quickly - after approx. 1 hour the surface can be repainted, fully dries within 24 hours.

Packaging: Paint usually comes in 17 ml./0.57 fl.oz. bottles. with a dropper. This packaging prevents evaporation and drying of the paint in the container, so it can be used in minimal quantities and stored for a long time. Some shades or special colors are packaged in bottles of 32 ml./1.08 fl.oz. with screw cap.

Not suitable for children under 8 years old. Children's work with paint must always be supervised by an adult. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not rub it on your skin.
H phrases: none. P phrases: none. Symbols: none.

Mix the paint well before use. Apply to a well-degreased, dry, clean surface. Always close the paint well, because it dries with air access. Always wipe the top of the container dry, do not let paint residues dry even on the edge. This will extend the shelf life and life of the paint.

Dilution: Use plain clean water or Vallejo original thinner. If you use another thinner, the color may deteriorate.

Applying: The paint is too thin to apply with a brush.

Spraying: For spraying, the paint is supplied already diluted, but if necessary, you can dilute it appropriately with water/thinner, according to the type of spray gun and other spraying parameters. To improve the flow of paint through the nozzle of the spray gun, we recommend using Vallejo Flow Improver, which significantly increases the comfort of spraying.

Drying time: Against the touch, the paint literally dries "before your eyes" within a few minutes. Drying can be accelerated by using a hair dryer. Complete drying takes approximately 24 hours, depending on the thickness of the layer. For further painting/spraying with a new layer, just wait a few minutes for the original layer to dry.

Cleaning: Wash immediately with water after use. While the paint is fresh, it can be completely washed off without leaving any traces. To clean the spray gun, we recommend using Vallejo Airbrush Cleaner (71099 or 71199).